Pineapple Strawberry Kefir
Pineapple Strawberry Kefir
Equipment:
1 x Fermenting Jar
1 x Funnel
1 x Plastic Strainer
1 x Storage Jar
1 x Plastic Spoon
Ingredients:
4 Tbsn Water Kefir Grains
4 Tbsn Raw Sugar
1 Tspn Molasses or a pinch of bicarb soda
4 Cups Filtered Water
1 Cup Pineapple, cored and diced
1 Cup Strawberries, stem removed
Method
Step 1:
Place water kefir grains into the fermenting jar using a plastic spoon.
Step 2:
Add Filtered Water, sugar and molasses to fermenting jar. Stir well until all is dissolved.
Step 3:
Leave the fermenting jar with the cap loosely closed on top of your bench top if you live in a warm environment. Alternatively if you live in a cool environment place the jar in a warm (but not hot) part of the house. Anywhere from 22- 30 degrees Celsius is fine. Different strains of microbes are more active at different temperatures.
Step 4:
Check your kefir a couple of times a day. Give the bottle a little nudge and see if bubbles appear (this shows fermenting has started). If the lid is airtight let a little bit of air out and see if you hear any hiss of gas escaping. You can try a little bit each time to familiarize yourself with how the flavour develops.
Step 5:
After approximately 24-48 hours your kefir will be ready. If you have used an airtight fermenting jar or bottle the kefir is likely to be fizzy. If your vessel was not completely pour the water kefir through the strainer so all the kefir grains are caught and the liquid is collected in a second jar or bottle. When finished, place a strainer over your storage jar and airtight it will not have bubbles. If it tastes overly sweet you can continue to ferment it until some of the sweetness reduces.
Step 6:
When finished, place a strainer over your storage jar and airtight it will not have bubbles. If it tastes overly sweet you can continue to ferment it until some of the sweetness reduces.
Step 7:
Puree the pineapple and strawberry and then mix with equal parts of the water kefir liquid. Place straight in the fridge, or do a second ferment on the bench top to make the mixture fizzy.
Step 8:
To “second ferment” simply put the bottle of kefir liquid and fruit puree on the bench top out of the sun and leave at room temperature for around 12 hours. A closed lid will ensure bubbles appear. After 12hrs transfer it into the fridge and start consuming it.
Step 9:
With the leftover kefir grains start a new batch of kefir or put them to “sleep” in the fridge by mixing sugar and water plus a tiny amount of minerals. The amount of sugar should be equal to the volume of the grains.
Tip:
Minerals can be found in molasses, a pinch of bi carb soda, a pinch of a crushed (clean) eggshell, or trace mineral drops. Only a tiny amount is needed. Sugars such as coconut palm sugar and the darker sugars also contain a small amount of minerals. White sugars have had all the minerals removed.